ModuRamp

ModuRamp launch ramps. Core series fits Slash, Rustler 4x4, Maxx, Kraton, Typhon and more.

Two profiles, drawn to scale

Same ramp. Different send.

Both profiles share the first 15″ of arc, the skin, and all three braces. The Launch 40 keeps the arc going and exits at 40°. The Kicker 55 adds a tighter flick at the top and exits at 55°. At the same speed the 55 lands a little shorter and goes a lot higher, with more hang time to rotate. Swap the side plate module and you have the other one.

40° 55° Launch 40 40° exit · 10.4″ lip · one long arc Kicker 55 55° exit · 11.1″ lip · same arc, then a flick Side plates to scale. Shared arc to 15″, then the profiles split. 24″ face · same skin, same braces
5 ft 10 ft 15 ft 20 ft 25 ft 30 ft 6.4 ft up · 1.2 s · 40° launch 9.9 ft up · 1.5 s · 55° launch 27 ft 26 ft Same speed. Different air. 20 mph at the lip, launching at each profile’s exit angle, no drag. The Kicker trades a couple of feet of distance for a lot more air.

Plate outlines are drawn from the current production geometry; lip heights are calculated and will be confirmed on the finished plates.Flight paths are simple projectile geometry at a 20 mph launch with no drag, leaving at each profile’s exit angle. For comparison only; the calculator in The Lab does this for your truck. Real air depends on the truck, the speed, and how much you commit.

Skip to results list
0 items

No products found.

Try using fewer filters, or clear all filters.